Oxford |
Code of Ordinances |
Part II. CODE OF ORDINANCES |
Chapter 30. SUBDIVISIONS |
Article V. CONSERVATION SUBDIVISIONS |
§ 30-207. Development requirements.
Conservation subdivisions shall meet the following requirements:
(1)
Minimum subdivision size: ten contiguous acres.
(2)
Lot area: no minimum.
(3)
Average lot width: The average width of all building lots shall be at least 75 feet.
(4)
Minimum road frontage per lot: 45 feet.
(5)
Minimum yard areas (setbacks):
a.
Front: 20 feet. Exception: The front yard setback may be reduced to five feet if dwellings are provided rear entry garages. To qualify for the reduced setback on a corner lot, side entry garages must be located to the side adjacent to an abutting lot.
b.
Rear: 20 feet.
c.
Side: Ten feet.
(6)
Exterior project street frontage green space strip: 50 feet in width (not part of any building lot). Landscape entry features such as fences and walls may be allowed in the green space strip.
(7)
Maximum height: 35 feet.
(8)
Minimum floor area: Each dwelling unit shall have a minimum heated finished living area, excluding a basement, attic, carport or garage, as follows:
a.
One story: 1,000 square feet.
b.
Two story: 1,500 square feet.
(9)
Parking: Property shall accommodate two spaces of off-street parking.
(10)
Street trees: Street trees, in accordance with the requirements of the buffer and landscape ordinance, shall be provided.
(11)
Underground utilities: All utilities shall be located underground.
(Code 1997, § 19-105; Ord. of 12-5-2011(04), § 1)